Si-Plan Electronics Research
  • Home
  • About
  • Machines & Products
  • Services
  • Machine Control & Data Acquisition
  • Principal Activities
  • Service, Repair & Calibration
  • Contact
Home / Machines & Products / Breathing Simulator / Human Breathing Mask Testing
Human Breathing Mask Testing

Dual breath simulator with dummy heads and face mask pressure monitoring. Can be run with synchronised breathing or entirely independently

Human Breathing Mask Testing

Dust mask testing with pressure monitor in breathing airway

Human Breathing Mask Testing

Dummy head on breath machine with eye pressure monitoring port

Human Breathing Mask Testing

Breathing Simulator with head & changeover valve for one way breathing

Human Breathing Mask Testing

Aviation breathing mask testing

Human Breathing Mask Testing

The Si-Plan human Breathing Simulator can be used for testing masks and life support systems. In applications where two life support systems operate from one central platform, e.g. in a military aircraft, it is important that both the pilot and co-pilots systems work correctly. Two Si-Plan breathing machines can be operated from one control system. When combined into one system they can be used entirely independently or synchronised.

Many test procedures require the measurement of the air pressure inside the mask relative to the surrounding environment to enable the work of breathing to be established. In these situations, along with the shape of the mask the location on the pressure monitoring port can be critical.

With this in mind the Si-Plan breathing machine dummy head form has two pressure port locations. When testing full face masks the chosen location is often in the eye socket. The alternative location is in the mouth airway. This is particularly useful when testing SCUBA diving regulators and military aviator face masks used in non-pressurised aircraft.

Si-Plan Electronics Research Ltd
Avenue Farm Industrial Estate,
Birmingham Road,
Stratford-upon-Avon,
Warwickshire,
CV37 0HR, UK
Company Name
  • +44 (0)1789 205849
  • Send us an eMail

The Si-Plan logo is a registered trademark of Si-Plan Electronics Research Ltd.
All other trademarks are acknowledged. © 2000-2019 Si-Plan Electronics Research Ltd. All rights reserved.